Of course, the renovation of new houses is indispensable to buy furniture, and many people regard plate furniture as synonymous with low-end furniture. This is actually a misunderstanding. Many panel furniture are also very high-end, and some so-called solid wood furniture is just a wolf in sheep's clothing.
The material of the panel furniture does not fully represent the price. Even the panel furniture may be more expensive than the solid wood furniture. The material is not representative of the quality, and the inferior solid wood furniture can not be compared with the excellent panel furniture in quality. In fact, high-end panel furniture is more expensive than solid wood furniture. For example, Chiba Milan International, Furantis, Yufeng, a set of living room audio-visual cabinets for about 20,000 yuan, is not new to them.
Fake: recognize fake wooden furniture
The gray wolf is covered with sheepskin and it is just a wolf!
Solid wood veneer furniture: the market volume is not easy to ignore
Before the implementation of the General Technical Conditions for Wooden Furniture, not many people referred to solid wood veneer furniture as solid wood furniture, which is visible on the surface of the furniture, including the surface and frame structure are pure solid wood (such as using unknown miscellaneous Wood), but the solid wood veneer (such as wood veneer such as teak, ash, etc.) is attached to the solid wood. The reporter found in the market that although there are not many such furniture, the concealment is very strong, and many promoters recommend it as a solid wood furniture to consumers.
Advantages: cheap
From the outside, wood veneer furniture has no difference with the first two kinds of solid wood furniture, but in fact, the cost of solid wood veneer furniture substrate material is the lowest, so the price should be the cheapest. The lines of solid wood veneer furniture are the most beautiful, and the design is more simple and fashionable. In solid wood furniture, it is the most cost-effective product.
Disadvantages: the heaviest process
Solid wood veneer furniture is the most exquisite craftsmanship. If the craft is not refined, the veneer is easy to foam or even fall off. When consumers buy furniture, they must ask in detail, and then see if the craft at the veneer is flat.
Identification method: look closely at the wood grain knot
It is not difficult to identify the type of "solid wood furniture". In general, in order to express the true texture of wood, manufacturers generally only apply varnish or matt paint on the surface.
First look at the edge. All solid wood furniture is made of solid wood, so there is no edge banding. Then look at the wood grain and the knot.
From the appearance point of view, solid wood furniture and all solid wood furniture are no different, no edge sealing, the natural texture, feel and color of the wood are exactly the same as all solid wood furniture. However, looking closely at the material of the partition, side panels, bottom or top, you will find that the grain is completely different from the texture of the main material, because in these parts, it uses cheaper wood. If it is a combination of wood and wood, although the wood grain is the same, there may not be a knot.
Carefully observe the door and the countertop. If you find that the wood grain is different, or there is no knot at the concealed place, you can be sure that the furniture is solid wood veneer furniture.
Name: Panel furniture is not low-end
Fish and dragons have to mix their eyes and buy good
Plate furniture is rich in expression
Sheet furniture is a piece of furniture made of artificial boards and connected by hardware. Common artificial boards include plywood, blockboard, particle board, and MDF.
The common finishing materials for panel furniture are thin wood (commonly known as veneer), polyester lacquer (commonly known as baking varnish), wood grain paper (commonly known as sticker), PVC rubber sheet, etc. The latter two finishes are typically used for low-end furniture, while natural veneer finishes and piano finishes are used for mid- to high-end products. At present, the veneer of some panel furniture on the market is more and more realistic, the gloss and feel are good, and the craft of piano paint is becoming more and more exquisite, of course, the price is also very expensive.
Advantages: outstanding appearance
The popularity of panel furniture is mainly because it has a variety of appearances, novel style, bright colors, clear wood grain and no deformation, no cracking, anti-mite, moderate price and become a new family in the furniture category. It can be said that the panel furniture has more changes in the shape design and more personality. Most of the modern furniture currently on the market is such furniture. The combination of panel furniture usually uses various metal hardware, which is very convenient for assembly and disassembly. The panel furniture with high processing precision can be disassembled and installed multiple times.
Disadvantages: not environmentally friendly
The disadvantages of panel furniture are mostly not environmentally friendly. For example, some manufacturers produce materials such as particleboard, and if the veneer is not fully packaged, it is easy to release formaldehyde harmful to the human body. Furniture produced using wood-based panels with excessive formaldehyde will cause indoor environment pollution. Consumers should pay attention when purchasing. You can open the door or drawer to smell it. If there is a strong irritating smell, it is mostly formaldehyde, and it is not suitable for purchase.
How to identify panel furniture
The first step in judging the quality of panel furniture is to identify which board it is used for. Open the door and carefully observe it in the hinge slot and the eye-opening. It can be seen that the panel furniture is MDF or particleboard. Generally speaking, the internal structure is exposed in the hinge groove and the eye-opening. The cross-section of the particleboard is similar to the honeycomb shape, the structure is coarse, the internal structure of the MDF is uniform, and the density is moderate, so it is easy to see whether it is a particle board or a density board.
The second is to judge what veneer is used for panel furniture. High-grade panel furniture is generally made of solid wood veneers, commonly known as black walnut, cherry wood, teak, ash, eucalyptus and so on. The Federation also has furniture with solid wood veneer, Jianwei's cherry wood series, Qumei's oak series, and Dynasty's holy wood series are all solid wood veneer furniture.
The sticker refers to the chemical veneer on the surface of the plate, such as triammonide plate and wood grain paper. The white oak series of Jianwei, the red apple, the Hong Kong dynasty, and the Jiahao room are the most exquisite in the sticker furniture. To the point.
To find out whether the furniture is veneer furniture or sticker furniture, the easiest way is to observe the pattern. The solid wood veneer has natural frugality, color difference and texture change. Then there is touch by hand, the hand feel is different, and the veneer has a concave and convex feeling. , three-dimensional. The second is to pay attention to the advantages and disadvantages of the edge-sealing material, whether the edge banding is uneven or lifted.
The paint process is getting more and more advanced
In the low-end panel furniture, you can also see the traditional painting process. The middle and high-end panel furniture is mostly painted. At present, the best piano lacquered panel furniture is the most commonly used surface technology for panel furniture.
It is understood that the current maximum number of baking lacquer is eight layers, and the general quality plate-painted furniture is six-layer paint.
The base of the paint furniture is generally medium-density board. The surface is polished, primed, dried and polished. It is divided into three types: bright light, matte and metal paint. The advantages are bright color, strong visual impact, moisture resistance and waterproof performance. superior. Easy to clean, no oil, no fading.
Tips for choosing panel furniture:
Hardware connectors are key
The hardware connector is the most intuitive quality standard. The good hardware should be freely switched, no noise, and the surface coating does not peel off. The hardware of some high-end panel furniture is imported, and the foreign language logo can be found on it. Metal parts require dexterity, smoothness, and good surface plating treatment. There should be no rust, burrs, etc. The precision of the fittings is high, and the open connectors require flexible rotation.
Edge banding affects quality
Look carefully, the quality of the edge will largely affect the quality of the furniture. The first is the pros and cons of the edge-sealing material, and secondly, it is necessary to pay attention to whether the edge-sealing is uneven or tilted. Good edge sealing should be tightly stitched with the entire piece.
Careful inspection of sheet quality
Carefully check whether the glue on the side and surface of the board is evenly coated, whether the bond is firm, whether the trimming is smooth and smooth, and whether the end face of the visible part such as the side plate of the component, the door panel, the drawer panel, etc. is edge-sealed. The well-decorated sheet has no trace of adhesion on the edge.
Assembling the assembly mainly depends on whether the hole at the hole is exquisite and tidy. Whether the connector is firm after installation, whether there is a gap between the plane and the end face, and there is no looseness in the hand.
Size has standard
At present, the furniture on the market mainly consists of complete sets of bedroom furniture and office furniture, as well as some functional cabinets and other products. The national standards for the size of furniture have regulations and requirements.
For example, the depth of the space in the hanging wardrobe should be 530 mm or more, the height of the table furniture should be 680 mm to 760 mm, and the clearance height between the bookcase layers should be 230 mm to 310 mm. If the furniture is smaller than the specified size, it will cause a lot of inconvenience when used.
Car Seat for Toddler, forward facing safety seats, rearward facing safety seats, car safety seat for toddler
NINGBO BABY FIRST BABY PRODUCTS CO.,LTD. , https://www.babyfirstseats.com