Fully automatic plastic extrusion blow molding machine

【Patent Name】 Fully Automatic Plastic Extrusion Blow Moulding Machine 【Applicant】 Cai Jiayu 【 Inventor】 Cai Jiayu 【Main Applicant Address】 318020 No. 890 Erhuan West Road, Huangyan, Zhejiang Province [Application Number] 200410053493.1
【 Application Date 】 2004.07.28
[Examination and announcement number] 1727170
【 Validation announcement date 】 2006.02.01
[Main classification number] B29C49/04(2006.01)I
[Categorical Information] B29C49/04(2006.01)I B29C49/58(2006.01)I B29C49/56(2006.01)I B29C49/50(2006.01)I
[Instruction CD-ROM] D0605-1
【 Abstract 】 Automatic plastic extrusion blow molding machine has an extruder, a die that connects the barrel of the extruder, a blowing mechanism matched with the discharge die of the extruder, and a cutting device. The blowing mechanism is installed on a rotary table, and at least one blowing mechanism is mounted on the rotating table. The blowing mechanism consists of a frame, a fixed template, a movable template and a mold clamping mechanism, and a reciprocating blowing system. One side of the rack is installed with a fixed template, the other side of the rack is equipped with a mold clamping mechanism, the clamping mechanism is connected with the movable template, and the movable template and the fixed template are turned into a single-plier clamp type to open and close the mold. In this solution, the blowing mechanism is mounted on a rotary table, so that the entire machine is small in size. Particularly, the two templates are single-piece and clamp-on, and the mold is closed. When the rotary table drives the fixed template to the bottom of the extruder die, The billet just enters the mold and the work efficiency is high.
【 Agency 】 Zhejiang Hangzhou Jintong Patent Office Co., Ltd. [Agent] Chen Xiangqun Wang Guanming