Many UV ink suppliers will recommend a range of applications, such as the color nitriding of rubber blankets or the nitriding treatment of nitriding can be combined with oil-based UV inks and coatings; while natural rubber and polyethane materials are swollen and not suitable for UV inks. And Varnish; EPDM rubber is particularly suitable for UV inks and coating oils, but not for general inks. The ink roller of the printing press is also based on this principle. It is not always possible to use UV inks and general oil inks. If necessary, the ink must be cleaned to remove any residual chemicals.
General installation of UV lamps should consider the type of printing press. BASF's UV inks and coatings use industrial pressure mercury lamps or microwave H bulbs. If the first one is monochrome, use two 120w/cm medium-pressure mercury bulbs. Generally, the difficulty of drying four-color UV inks is magenta, yellow and black. Therefore, the sequence of UV color printing should be black, cyan, yellow, magenta.
Some colors are very difficult to deploy. For example, green is made of yellow and cyan tones. In addition, the preparation of opaque colors is also difficult because it reflects off all UV light. The same problem exists for metallic, gold, and silver.
The lifespan of UV mercury lamps is certain, too old lamps can't dry UV ink or varnish. Most instructions on the UV lamp indicate that after about 1,000 hours of use, the UV lamp must be replaced. In actual production, if you feel that you can't dry prints at normal printing speed, you must consider replacing the UV light.
If no reflector is installed, about 80% of the UV light will not be applied to the printed material due to diffusion. Therefore, the UV lamp must be installed with a lamp shade to reflect and focus on the direction of the printed material. Colleagues must also clean and maintain the reflector at all times. If some paper dust or powder dust adheres to the reflector, it will affect the UV lamp reflection effect; if the UV lamp is not used for a long time, the UV lamp cover should be closed to prevent dust from entering.
Source: PACK.CN
We are a company specializing in manufacturing and sales of Pet Products including Pet Bowls , Pet Carrier, Pet Clothes, Pet Collar and leashes, ect. We offers a great range of dog bowls in different styles and sizes. Stainless steel dog bowls are easy to clean and plastic dog bowls are great for travel and outdoor use. If you spend a lot of time away from home see our selection of food dispensers & dog drinking fountains, some of which can be put on timers to provide dinner for your dog while you are away.Made with high quality and Eco-friendly materials, our pet products passed the FDA, BRC and ISO certification, also reached the US and European export standards. They are exported to America, Europe, Middle East, Africa, Southeast Asia and other countries. All of our pet bowls and feeders can be customized. Welcome to send us inquiry.
Pet Bowls,Pet Feeders,Automatic Dog Feeders,Dog Water Bowl
Hebei Maische Pet Food Co., Ltd. , http://www.petfoodchina.com