The weather is gradually picking up, and on the occasion of spring, many home improvement friends are also eager to try. It is understood that from March is the annual peak of home improvement, and many friends have begun to start home improvement, choose building materials, choose furniture. Do friends think that choosing furniture is easier than choosing building materials? Do you think that furniture can only be picked up? In fact, the purchase of furniture also contains shopping skills.
Today, the author will bring you the purchase skills of home improvement furniture, and interested friends may wish to come together to understand it.
hope
Reasonable materials
Different furniture, surface materials are different. For example, the legs of tables, chairs and cabinets require hardwoods, which are relatively strong and can bear the weight, while the internal materials can be used with other materials; the thickness of the large wardrobe legs is 2.5cm, too thick and clumsy, thin and easy to bend Deformation; kitchen and bathroom cabinets can not be made of fiberboard, but should be used with plywood, because the fiberboard will expand and damage when exposed to water; the dining table should be washable.
Four feet guarantee a smooth
This point is flat on the ground and I know that some furniture has only three legs to land. Look at the desktop is straight, can not bow back or collapsed. The table top is raised, the glass plate is placed on it, and the table top is recessed, and the glass plate is crushed by a pressure. Pay attention to the inspection cabinet door. The gap between the drawers should not be too large. It should be horizontal and vertical, and the door should not sag.
Patchwork leveling
Whether it is veneer veneer, PVC or pre-painted paper, it is necessary to pay attention to whether the leather is flat, whether there is drum, foaming or not.
Look at the light when you check it, and don't see it when you don't. The ash veneer veneer furniture is more susceptible to damage and can only be used for two years. In the case of wood veneers, the veneered veneers are better than the chopped ones. Generally, the corners of the veneer furniture are easy to be tilted up. When picking, you can use your hand to rub the corners. If you get up, you will have problems with the glue.
Whether the edging is flat
The edge banding should be rounded and not straight at right angles. If the edge is not flat, the inner material is damp and the edge is prone to cracking. The furniture inlaid with the plywood is nailed with nails. It is necessary to pay attention to whether the nails are flat and whether the color of the nails is consistent with other places. Usually the nail hole is sealed with putty. If the putty is bulged, it is easy to fall out.
The mirror cannot be deformed
Choose furniture with mirrors, such as dressing table, mirror, and dressing mirror. Take care of it and see if the mirror is deformed. Check if there is lining paper and backboard at the mercury in the back of the mirror. Qualified, without the liner, it is easy to wear off the mercury.
smell
Full inspection inside and outside
If the wood has insect eyes and ends, it means that the drying is not complete. After checking the surface, open the door and drawer door to see if the inner material is rotten. You can use your fingernail to lick it. If you break it in, it means that the inner material is decaying. After opening the door, smell it with your nose. If it is nose, glare, or tears, it means that the formaldehyde content in the glue is too high and it will be harmful to the human body.
Reasonable installation of accessories
The panel furniture uses metal parts and plastic parts as fastening connectors, so the quality of the metal parts also determines the quality of the inner quality of the panel furniture. The metal parts are required to be dexterous, smooth, and surface-plated, and there is no rust, burr, etc., and the precision of the fittings is higher. Plastic parts should be beautiful in appearance and bright in color. The parts of the force in use should have strength and elasticity, and should not be too thin. Open-type connectors require flexible rotation, and the springs inside are tightly fitted so that the furniture is balanced, easy, and friction-free when opened.
In addition, you should also check that the door lock switch is not working; the big cabinet should be equipped with three hidden hinges, and some can only be installed with two; the upper three screws, some manufacturers cut corners, only one screw, consumers It will fall off when used.
ask
Focus on environmental indicators
When asking about the price, you must not forget whether the furniture meets the relevant national environmental protection regulations and whether there is relevant certification. If you buy branded furniture, you can ask and ask the salesperson to explain the smell properly. At the same time, check the quality certificate. If it passes the national inspection, some smells are inevitable with paint, adhesive, etc. The door can be eliminated for a while.
cut
Water content should not exceed 12%
The moisture content of northern furniture generally should not exceed 12%, the water content is high, and the wood is easy to warp and deform. When the average consumer buys, there is no test instrument. You can take the method of hand touch and touch the bottom of the furniture or the place where there is no paint inside. If you feel the moisture, the moisture content is at least 50%, which cannot be used at all. Another way is to sprinkle a little water on the unpainted wood. If it is slow or not, it indicates a high moisture content. Furniture with too high moisture content not only has quality problems, but also increases the release rate of formaldehyde.
The structure must be firm
Small pieces of furniture, such as chairs, stools, hangers, etc., can be dragged on the cement on the cement floor, and the sound is crisp, indicating that the quality is good; if the sound is dumb, there is a murmur in the slap, indicating Blinking is not tight and the structure is not strong. The desk and table can be shaken by hand to see if it is stable. The sofa can sit and sit. If you sit on a move, it will ring. If you shake it, it will be a nail, and it won’t take long.
Square table, tables, chairs, legs should have four triangular clamp, from the fixed effect, the selection can take a look at the tables and chairs upside down, cloth chairs can hand touch.
Pickup Roller and Seperation Pad for Samsung printer. brand new.material is imported.100% inspection.quality is almost same as original.all parts go through district inspection before shipment. complete after-sales service system.
We are manufacturer and the leader in Printer Parts & Supply industry. 8 years in printer parts and supplies industry in China.our quality and service are dependable.
All parts are extensively tested by quality control experts to ensure high quality. These parts are choice for printer maintenance and repair need.
Thank you and wish you have a good shopping experience!
Pickup Roller,Printer Parts For Samsung,Samsung Pick Up Roller,Seperation Pad
Dunhua Office Equipment Co., Ltd. , https://www.dunhuaparts.com