"From the perspective of protecting the environment and conserving resources, the suggestions for the appearance of wooden door products are mainly based on maintenance. What aspects should be paid attention to when choosing a door? It has always been the most concerned topic for every consumer. The manufacturer recommends that the choice of solid wood doors should not be blind. Should pay attention to the following points:
1. Buying a door to buy a solid wood door "Chinese people tend to love wood products for ten minutes, but they ignore the natural attributes of wood." Wu Chenxi pointed out that the stability of solid wood doors is not strong, and it is easier to produce doors than other types of doors. Deformation, fission at the joints, and surface cracking. In fact, the performance of solid wood composite doors with good environmental performance is not worse than that of solid wood doors, and even the stability will be better than that of solid wood doors.
2. The heavier the door, the more the solid wood door is strengthened. “The weight alone cannot judge the inner part of the product.†Zhang Peng pointed out that the weight of the particle board sometimes sinks than the solid wood board. “Although the raw material used to make the particle board is broken wood. However, a lot of adhesive is applied during the production process, and the adhesive occupies a considerable proportion in the sheet after curing, resulting in a component that is not light.†In addition, due to the difference in the size and thickness of the door leaf and the filler of the door core, the wooden door is also caused. The reason for the difference in weight. Therefore, the specific weight is not the most reasonable basis for judgment.
3. Shop around, choose cheaper "reinforced wooden doors are not the same as other goods, consumers can only see the surface of the door, its internal quality can not be judged." Zhang Peng pointed out that even if it is an expert, just observe the appearance sometimes It is difficult to judge the inner inside of the reinforced wooden door. It is recommended that consumers not only look at the price of the cheap, but ignore the inherent quality of the product. Wu Chenxi pointed out that the environmental performance of the door is extremely critical. "Consumers and their cheaper solid wood composite doors, it is better to choose expensive paint-free doors, so environmental protection is more secure."
4. Consumers who judged the "smart" part of the door core by the door lock hole observed that the door lock of the strengthened wooden door was installed on site. "Why don't you observe the core material of the reinforced wooden door through the door lock?". However, Zhang Peng pointed out that in the manufacturing process of the reinforced wooden door on the market, in order to make the locks more secure after installation, the strength of the door lock hole area will be strengthened, and most of the linings are used. Therefore, the door lock is adopted. It is not very realistic to inspect the core material of the hole in the hole. When consumers choose wooden doors, they often only pay attention to the quality of the door leaf. However, Yang Bin pointed out that many of the after-sales problems that appear in the wooden doors are actually from the door sets. There are three kinds of solid wood multi-layer door covers, MDF door covers and solid wood door sets on the market. The waterproof and moisture-proof performance of the MDF door cover is relatively poor, and it is easy to cause the wooden door to sink and scrape. The solid wood door cover is generally tooth-joined, and the screw is easy to form a smashing phenomenon. She pointed out that the best choice for solid wood composite doors is the standard door panel with solid wood multi-layer board, which can guarantee the service life of wooden doors.
5. Only pay attention to the door leaf, do not care about the door cover 6. Never allow color difference 7. Reinforced wooden doors with cracks that require returning chromatic aberrations cannot be completely avoided. For example, the paint-free door of the same suit may have different colors due to the different batches of the cover material, and it may happen that the color seen by the consumer in the store is slightly different from that at home. The paint door of solid wood veneer is even more so. The parts of solid wood veneer are different, the age of the wood is different, and the color of the cut pattern is not the same. "The same is black walnut, and some may have darker colors, which may be shallow. This is caused by the natural properties of the wood; the difference in the number of paint passes and the difference in the color of each paint may cause slight deviations in color, so consumers cannot excessively pursue the color difference of the wooden door."
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }Cake Decorating Tools,Baking Tools,Baking Utensils,Cake Baking Utensils
Yangjiang Yado Kitchen Industry Co., Ltd. , https://www.yadokitchen.com