Wooden door installation time should not be too urgent
Under normal circumstances, the measurement and installation time of the wooden door must have a certain surplus, which means that there is enough time for the wooden door manufacturers to have sufficient preparation time. Generally, the wooden door is measured three days in advance and the installation needs five days in advance. Because the time is too tight, it will lead to the installation workers of the wooden door manufacturers can not open, just looking for someone to install it is easy to have some unnecessary troubles in the installation.
Wooden door sent to the inspection
After the wooden door manufacturer sends the wooden door, it is necessary to check carefully whether the wooden door sent by the manufacturer is the color, model, quantity and material of the wooden door that was ordered at the time of ordering.
First install the door and install the floor
After the wooden door is installed first, the door cover of the wooden door can directly contact the ground. Then look at the thickness of the floor, and reserve the position below the door cover according to the thickness of the floor. The extra door cover part will be sawed out of reasonable space to fit the floor.
Careful explanation in the installation of wooden doors
During the installation of the wooden door, the personnel responsible for the installation of the wooden door are carefully explained in detail to the installation requirements and their own ideas. At the same time, inform the direction of the underground concealed pipe and the waterway to make it clear, so as to avoid unnecessary trouble. If there is any dissatisfaction in the installation, let the person in charge of the site coordinate and solve it.
The quality of wooden door hardware accessories is an important factor affecting the use of wooden doors
The installation of wooden door hardware accessories shall be in accordance with the design and installation specifications, and the position shall be accurate, and there shall be no omissions. Wood screws and wind hooks must not be entered at once. The door frame is flush with the plaster surface. When the door lock is installed, the slot should be accurately standardized, the size is the same as that of the lock body lock; the door lock should be tightened and unlocked without any abnormal noise; the accessories are fully installed, and the fixing screws should be fully and straight.
For the hinge installation of the wooden door, the vertical flatness is required, and the flat hinge should be slotted corresponding to the wooden door leaf and the door cover. The notch should be standardized, the size is the same as the hinge, the tolerance of the three sides is +0.5, and the fitting is smooth and seamless. The hinge opening should be flexible. The hinge fixing screws should be installed in full and straight, hidden in the hinge plane. In short, different types of hinges must pay attention to all details during the installation process to ensure that the solid wood door can be opened smoothly.
breathable mesh material makes it easy to activate the chilling towel when you simply soak, wring out and snap it. The unique cooling system uses moisture from the towel to draw the sweat away from your skin to keep you cool. Everyone can use the cooling towel.
Sports Towels
Changshu Juhao Clean Textile Co., Ltd. , https://www.juhaoclean.com