As the ground material of sports venues, sports wood floors are denser in texture, and the colors are also very high-definition, and they are also very wear-resistant and resistant to decay. Do you know what the acceptance criteria for sports wood floors are? Today's encyclopedia lecture hall will answer this question for you. Please pay attention to the following three aspects.
First, the characteristics of sports wood flooring
1, sports wood flooring will not warp, but it will not hurt the original ground.
2, environmental health, in line with the current design concept.
3, will not breed termites.
4, its anti-mute function is very good.
5. No construction pollution will occur.
6, can be disassembled, maintained and saved.
Second, the sports wood floor pavement acceptance standard specification guarantee project
1. We must ensure that the sports wood material used, its specifications, grades and quality are as conforming as possible to the requirements of the construction site where the moisture content is lower than 18%.
2. When all kinds of sports wood floor boards and base layers are nailed, it must be ensured that there is no looseness, and the glue used when pasting is to meet the design requirements.
Test method: visually, step on foot, or tap with a small plastic hammer.
Note: If the emptying area is not more than 1/8 of the surface of a single floor board, and each room does not exceed 5% of the total number of checks, this will not be counted.
Third, the basic items of the sports wood floor covering acceptance standard
1. The surface quality of the floor surface of the wooden floor must comply with relevant regulations:
Qualified: Sports wood board surface requires smooth, no planing, burrs, and burrs, and the pattern is clear. The entire surface of the oil film surface is uniform in color.
Excellent: Sports wood board surface is very smooth, no planing, blemishes and burrs, not only the pattern is clear and beautiful, but the oil film surface layer is the same color.
Inspection methods: visual inspection, touch or footsteps.
2. The quality of sports wood board surface seams must meet the following requirements:
Qualified: The gaps in the floor plates are tight, and the joints are staggered and the surface is clean.
Excellent: The gaps in the floor plates are tight and the joints are staggered. The surface is very clean and the seams are straight and straight.
Inspection method: visual inspection.
3. The quality of paint on sports wood floors must meet the following requirements:
Qualified: The color of the sports wood floor is the same, and the surface is clean.
Excellent: The board surface of sports wood floor is smooth and bright with uniform color, and the wood grain is clear and the surface is very clean.
Inspection method: visual inspection, touch inspection.
The above is the standard specification for the inspection and acceptance of sports wood floor coverings and their characteristics. It is hoped that they can help the consumers who have paved sports flooring to perform floor acceptance.
Eyebrow Tools,Eyebrow Clip,Stainless Steel Eyebrow Clip,Fashion Eyebrow Clip
Yangjiang Etina Houseware Co., Ltd. , https://www.etinanailtools.com