The so-called wood-based panels are nothing more than our common large core panels, plywood, five-cent panels, nine-centimeter panels and particleboards, which are the most used decoration materials in our home decoration.
Q: When using solid wood flooring, what kind of large core board is used as the wool floor?
A: Considering the construction cost, some construction companies use the inferior core board to make the wool floor under the solid wood floor. This is because some people think that the wool floor only plays a balancing role on the lower side. The poor appearance does not affect the use. Nothing is fine. However, in fact, the quality of the wooden strips in the inferior core board is often poor, and the spacing between the strips is large. After the nails of the fixed floor are nailed down, the nail holding force is relatively low, and it is difficult to actually fix the floor, which will affect The service life of the floor. Therefore, if we use the large core board as the wool floor of the solid wood floor in the construction, we should use high quality products.
Q: Why should the heating hood's platen use a high quality large core board?
A: Some decorations (such as vases, flower pots, etc.) are usually placed on the platen of the heating cover. These decorations generally have load-bearing requirements for the platen. However, the inferior large core board can not bear the load-bearing task for a long time, and after a period of time, it will be deformed or even broken.
Q: How do you deal with the three sides of the door frame when you pack the door?
A: When the door is opened, the three sides (upper and left) of the door frame are subject to different forces, and the side on which the hinge is installed is the most stressed. Therefore, the side of the door frame should use a high-quality large core board as the lining, avoiding the use of artificial boards with poor fixing screws such as particle board, and the thickness should be larger than the length of the screws used for future hinges.
Q: Is it possible to use a nine-centre board and a three-ply board for the skirting board?
A: This practice is very common in the current home decoration process. Its advantages are that it is not easily deformed and the appearance is better. However, it should be noted that the nine PCT board must be firmly bonded to the facing plywood.
The use of solid wood lines Q: What is the role of solid wood lines?
A: In the woodworking operation of home decoration, the solid wood line has two functions: first, the decorative effect, that is, using the processed lines to cover the parts with poor visual effects; second, the protective effect, especially in the veneer The position of the closing position, if the line is not used for protection, the surface of the veneer in the future use of the owner is easily scratched and affects the use.
Q: Why should the door made on site be sealed with solid wood lines?
A: The wooden doors made on the site use solid wood lines to seal the four sides of the door. In addition to the aesthetic reasons, the main purpose is to increase the overall strength of the door. It is convenient and practical to install the hinge locks. The four sides of the protection door are not affected by improper use. Destruction, and it is also very convenient to repair.
Q: Is there a color difference in the solid wood line, can the knot be?
A: Since wood is a natural material, color difference is inevitable, and no one can avoid this phenomenon. However, some consumers unilaterally emphasize the problem of chromatic aberration of solid wood lines, and even the color difference of solid wood lines as a means of refusing to pay for construction projects is actually unreasonable. As long as the festival is not too big, it does not affect the quality of use is acceptable. What's more, some of the more modern or avant-garde consumers tend to prefer because of the natural feelings of the festival. The painter is a carpentry makeup artist and babysitter
Q: Is the painter taking on the role of a woodworking makeup artist?
A: People in the industry often say that even the best woodworkers need the cooperation of painters.
Because a woodworking project is only a semi-finished product of the project for the entire project, it must be dressed later by the painter, otherwise it is not necessarily satisfactory. As for those projects with poor quality woodwork, it is even more necessary for the painter to make up for the late dress. Moreover, the seasons vary greatly, and drying and wetting pose many problems for home improvement projects.
Therefore, after the completion of the woodworking project, the painter is often required to paint the project to avoid excessive moisture exchange between the wood products and the outside world, which affects the quality of the finished products of the wood products. This will protect the wood products from cracking. . In this sense, the painter is still a babysitter.
Glass clamp is so common to see in modern glass door system. Only a simple round glass cutout that shows its convenient both for glass supplier and user. To adapt practical application in the development of construction, a variety design of glass clamp emerges, such as straight line edge, bevel line edge, semi-round shape etc. Also different material available, which greatly enrich the style. JIANGYI has specialized in glass door clamp since 2000, our glass clip could pass 24 hours neutral salt spraying test and acid spraying test. Welcome for your consulting.
Specification
1. Material: Brass/ Stainless Steel/ Zinc. Alloy
2. Finish: Mirror / Matt / Antique/ Red copper / Gold / Rose gold
3. Suitable for glass thickness: 8-10mm, 6mm/ 12mm
4. Load weight: 45kgs
5. Must be tempered glass
Glass Clamp,Glass Brackets Clamps ,Stainless Steel Glass Clamps,Glass Shelf Clamps
Jiangyi Industrial Co., Ltd , https://www.cnjyhardware.com