What are the classification of heaters?

The heater is the ideal heating device for the modern family. It has a beautiful appearance and does not occupy the land. Sales in China have always been better. Today we will look at the classification of heaters, the brand of heaters.

What are the classifications of heaters?

Electric heater:

The hot air is clean, easy to use, and the equipment itself is economical and does not require other ancillary facilities. However, the general heating amount is not large and the use cost is high, and the plant electric load is also considered.

, fuel heater:

The indirect combustion hot air is clean, the equipment is higher than the electric heating fan, generally does not need other ancillary facilities, and the use cost is lower than that of the electric heater.

Gas heaters:

Generally, there are pipes, installation costs, and low cost of use.

, plumbing heater:

Boiler is required, hot water pipeline is required, the efficiency is the lowest, the use cost is low, and the comprehensive cost is high.

Electric heater: Usually, a high-temperature stainless steel heating tube is built in the equipment. It can generate temperatures of up to 400 degrees or more during operation, and then a fan can blow out the heat generated by it to achieve heat recovery.

Fuel heater: Generally use light oil such as diesel or kerosene, the fuel is directly sent to the combustion chamber through high-pressure atomization, and then the ignition device ignites a form of heating the heat exchanger, and the heat is blown out by the cold air to form hot air.

Gas heaters: These products do not require high pressure. Because the gas itself has a certain pressure, it can directly deliver the gas to the combustion chamber for heat conversion, but it is slightly inferior compared to the fuel-based product.

Coal-fired heaters: Compared with other products, they are relatively backward and not very environmentally friendly. They need to be manually added with coal. The degree of automation is low and they cannot be automatically thermostated. However, due to the low fuel price, some methods are applied in some special fields.

Direct-fired heaters: mainly refers to some fuel or gas products, which directly convert fuel energy, but the chemical substances generated after combustion are discharged into the room together with hot air, and are applied in places where air quality is not high. widely.

Inter-combustion heater: It is heated by flue gas separation. In order to improve the heat efficiency, a heat exchanger is built in, the combustion exhaust gas is discharged to the outside, and the hot air is sent to the indoor, which can be applied to various demanding environments.

Heater brand Daquan

First, TCL heater

Founded in 1981, Group Co., Ltd. is a global enterprise of intelligent product manufacturing and Internet application services. TCL's heater has 2000W high power; third gear adjustment; PTC ceramic heating element, that is, open and hot, no need to wait for heating. No light, low noise and warmth! It combines high energy and outstanding heating.

Second, the beauty of the heater

Midea is a leading technology group of consumer electronics, HVAC, robotics and industrial automation systems offering a wide range of products and services. Its heater adopts warm air and oil heating, double heating, 3 seconds lightning heating, and the whole house has a constant temperature, which solves the problem of the heaters on the market, such as the constant temperature, the oil and the non-speed heat.

Third, Dasong heater

Dasong's heater can be used for both house and bath. It is IPX2 waterproof. After multiple waterproof tests, the water is contacted at a 15 degree angle. Even if the water drops into the outer casing, it will not affect the machine. It can be used safely in the bathroom.

The above is related to the classification of heaters, the introduction of the heater brand Daquan, thank you for your interest in Xiaobian's article. Please also continue to pay attention to Pacific Home Network.