[ Chinese wardrobe network ] The process of the whole wardrobe is first to prepare raw materials, then woodworking, paint finishing, and finally packaging. If you want to make a whole wardrobe with perfect quality, the following three major equipments are required in the production process:
Equipment 1: Electronic cutting saw.
Large-scale specialized enterprises use electronic cutting saws to input the processing size through the computer, and the computer controls the size accuracy of the material selection, and can process 4 sheets at a time. The dimensional accuracy of the board with stable performance is very high, the tolerance unit is in the micrometer, and there is no collapse at the edge of the board. The small workshops have small manual cutting saws and even woodworking saws. The plate size error caused by this simple device is often larger than 1 mm, and the collapse phenomenon often occurs, and the plate substrate is exposed.
Equipment 2: Heavy-duty edge banding machine.
The quality of the overall wardrobe is fine, smooth and feels good, the edge is smooth and the joints are fine. The professional manufacturer completes all the processes at one time with a straight edge banding machine, and the precision of the machining dimensions can be adjusted to the most suitable position to ensure the most accurate size. The workshop-style small factory is to manually complete the above procedures. Due to uneven coating, the resulting edge is uneven, the line is undulating, and even has a sense of hand. Due to the uneven pressure, many places are not strong, and it is easy to open and fall off in a short time. Once the edge is removed, water ingress and expansion will occur. A large amount of toxic gases such as formaldehyde volatilize into the air, causing harm to the human body.
Equipment three: six rows of drills.
Today's panel furniture requires a lot of positioning holes on the board. The fit and precision of the hole position will affect the structural robustness of the overall wardrobe enclosure. The professional manufacturer uses a 32-module six-row drill to complete a plate edge and a number of holes on the plate surface. These holes are all the same positioning reference, so the dimensional accuracy is guaranteed in the hole position. . Handmade small factories use row drills and even pistols to drill holes. Due to the different positioning errors, the accuracy of the matching accuracy of the hole position is very large. In the process of box assembly, even the hole position is not matched, so that the combined box is not a regular square, but is distorted. of.
Blister Packaging Machine,Packaging Machine,Blister Pack Packaging,Automatic Blister Packing Machine
U-PAC CO.,LTD , https://www.upac-machinery.com