Test machine processing technology requirements

The processing technology of the testing machine directly affects the later use, so its quality depends on the materials used on the one hand, and its processing technology is also a very important factor.

1 , the processing of parts should meet the requirements of the drawings. Except special provisions, there should be no sharp edges, sharp corners, and with remanence.

2. Parts that are frequently twisted and easily worn out of steel parts should be heat-treated. Parts that have been heat-treated should not have cracks and other defects.

3 , quenched parts should not be due to grinding annealing and burning black phenomenon.

4 , after the processing of the mating surface, friction surface is not allowed to print.

5. The reticle of the indexing part of the testing machine should be accurate, uniform and clear, and the numbers should be aligned with the reticle.

6. The metal hand wheel rim and joystick should be polished and should be plated with a rust-proof layer.

Professional create value, Dongguan Haida cast quality! Dongguan Haida equipment specializing in the production of carton compression testing machine , burst strength testing machine, drop test bench , vibration testing machine and other packaging testing equipment, welcome to call!

For more detailed product series and related technical parameters, please contact:

National Unified Service Hotline: 400-0711-808

Haida International Instrument: 0769-89280808

company website:

Source: Dongguan Haida International Instruments    Reproduced without permission! (Or: if you need to reprint, indicate the source)