In the test of the salt spray corrosion test box, some abnormal problems often occur, and the customer cannot solve them well. Now we summarize some common abnormal problems and solutions as follows.
1. Cannot operate normally after turning on the power
Check whether the water level in the heating tank is too low. When the water level is too low, the device will cut off the power supply to ensure the safety of the device; therefore, when such a failure occurs, please check the water level in the heating tank first. After removing such faults, it still cannot run normally. At this time, there must be a functional fault in the equipment of the salt spray test machine. At this time, you can contact the manufacturer for repair.
2. There is a normal spray and the air compressor is not running normally
In general, for the safety of the equipment, the air compressor of the salt spray test machine is generally equipped with an automatic protection system. When the salt spray test machine is abnormally used, the air compressor will automatically stop running. In case of failure, you can use it as usual.
3. The spray of the salt spray test machine is not timed
When such a fault occurs, you should immediately check whether the laboratory temperature has risen to the specified temperature, because if the temperature does not reach the preset temperature, the timing device must think that the experiment has not started, so this type of fault can be checked by checking the preset temperature and the actual temperature. It can be discharged; of course, it may also be because the set time is the same as the spray time, which makes it impossible to observe the time.
4. The touch screen is not responding
Since the equipment of salt spray testing machine is gradually becoming more intelligent, most of the salt spray testing machines shipped now use touch screens; after eliminating the factors of screen lock, please contact the manufacturer for repair or replacement.
In addition to the above exceptions, other exceptions can be notified to the manufacturer for help.
Multi-functional Hot Air BrushReduce the heat damage,tangle-free & anti-static nylon bristles. Hair without burden. 360 degree airflow vents for fast,silky-smooth,shiny effect,improving volume and control.
Multi-functional Hot Air BrushUse it as a Blow Dryer,hair styler, volumize your locks, make your hair curly or wavy and straighten it of course. Perfect for dry as well as wet hair and all hair types. Efficient & Time Saving for salon blowouts at home.
Multi-Functional Hot Air Brush
Heated Hair Brush,Hot Air Curling Brush,Dual Voltage Hot Air Brush,Multi-Functional Hot Air Brush
Ningbo Meirou Electric Appliance Co.,Ltd. , https://www.mrhairdryer.com