In the home life, the wooden door is the bridge of communication. It can bring us more space, let us find the tranquility and warmth of the silk in the hustle and bustle of the city, so many owners in the installation and acceptance of the wooden door are Very concerned. So what kind of installation is considered qualified, as the owner how to carry out the acceptance work.
1. The appearance of the wooden door should be smooth and coordinated.
After the wooden door is installed, the surface paint film should not have any artificial quality problems such as scratches, scratches, defects, etc. After installation, the paint film on the surface of the wooden door should be smooth and flat, with delicate hand feeling, without sag, orange peel, pinhole, sand white, etc. Obvious quality problems. The door and door cover are made of the same material and texture. The overall paint color is uniform and coordinated. There is no obvious color difference at one meter.
2 wooden door installation should be vertical and smooth
During installation, the whole door must be perpendicular to the ground, the door leaf switch is flexible, and can be stopped at any point, there is no self-closing or self-opening; if the door leaf is unlocked, it will open or close by itself. The entire door is not perpendicular to the ground and is inclined. In addition, the gap between the door leaf and the door cover should conform to the national installation standard and be uniform; according to the standard requirements: the clearance between the door leaf and the upper frame/hinge side frame/lock side frame is ≥1mm, and ≤3.5mm, the outer door and the ground With the clearance ≥ 4mm, and ≤ 7mm, the clearance between the inner door and the ground is ≥ 5mm, and ≤ 8mm, the clearance between the bathroom door and the ground is ≥ 8mm, and ≤ 12mm;
3, the wooden door and the door cover are closely fitted
Usually, in order to facilitate access, the interior doors are generally open. After the door and door cover are installed, the back of the door should be flush with the edge of the panel or slightly lower than the edge of the sleeve by 0.5~1mm, and the sealing sleeve should be installed on the door cover, so that the door will not make a sound when it is closed. It can also ensure a better fit between the door leaf and the door cover; the face line pin and the sleeve slot are tightly joined, and the face line and the wall surface should also be tightly combined.
4, check the door cover situation
After the door cover is installed, there is no empty drum bending. You can use the vertical line or infrared to detect the verticality of the door cover. Tap the side cover of the door cover by hand to hear if there is any empty sound. If there is, the bottom plate and the wall The gap between the two is large. In this case, the door is not strong, and it is prone to accidents in the later stage. The base board should be removed or filled with styrofoam.
5, view the hinge door lock opening situation
The wooden door should be smooth when it is closed, and there must be no squeaking sound. The main locking and hinge slots must be tightly matched with the lock and hinge. All the screws must be completely screwed in and flat as the board surface. The door frame fits perfectly, and only meets the above installation standards, can achieve the effects of aesthetics, ventilation, sound insulation, and freely switchable. Finally, it is necessary to pay attention to whether the opening direction of the door meets the requirements.
The acceptance of wooden door installation is a more meticulous work. The overall appearance and the details of each joint need to be checked to ensure that no problems will occur during use and avoid rework and reloading.
Document.body.oncopy = function () { setTimeout( function () { var text = clipboardData.getData("text"); if (text) { text = text + " This article comes from China Wooden Door Network, China's well-known wooden door industry portal Website! (http://) Detailed reference: "+location.href; clipboardData.setData("text", text); } }, 100) }Pressed powder is mainly used for make-up. It is a beauty cosmetic made of a mixture of powder and matrix. Its shape changes with the shape of the container.
Pressed powder is mainly used for repairing uneven and falling parts of makeup. Generally, the powder cake is beautifully packaged with accessories such as Powder Puff and small mirror. It is convenient to carry around, and the powder is less flying when used.
Pressed powder can be divided into two main categories: beauty powder and compressed powder.
(1) Cake makeup
(2) Compressed powders
Compressed powder is a product made by pressing the powder and matrix mixture on a small plate under water pressure. Use the same type of dry powder puff as the loose white powder to apply. In recent years, the process and technology of compressed powder cakes have been greatly improved. Adding some gums, oils, esters and emulsifiers into the powder cake improves its spreading, covering, durability and other aspects.
Face Powder,Llluminating Pressed Powder,Flexible Coverage Pressed Powder,Matte Pressed Powder,Natural Pressed Powder etc.
Face Powder,Llluminating Pressed Powder,Flexible Coverage Pressed Powder,Matte Pressed Powder,Natural Pressed Powder
Jilin Xiangqi Technology Co., Ltd , https://www.xqccosmetics.com