The King's Plate Encyclopedia has started classes again. About the large number of propaganda about solid wood thick core boards that appeared in the past year, I believe many people still don't understand what is solid wood thick core board, what is a three-layer thick core, what is a five-layer thick core What is the relationship with thick core multi-layer boards. Today, King KINGTIMBER Xiaojun helps everyone to solve doubts.
First of all, solid wood thick core board is a kind of plywood (also called multi-layer board or plywood). It is defined according to the national plywood standard: plywood is cut from logs into veneers or cut into thin wood, and then glued with adhesive. A thin sheet of three or more layers, usually 3MM-18MM thick . The traditional approach is 5MM three-layer core, 9MM five-layer core, 12MM seven-layer core, 15MM and 16MM are nine-layer core, 17MM and 18MM are eleven-layer core. Solid wood thick core board, the structure is different from the traditional craft, 17MM , 18MM with three or five layers of spiral cutting sandwich, the top is complemented by the whole large skin and veneer. Because the edge of the board looks closer to the solid wood, it is favored by consumers with the advantage of less glue.
The appearance of solid wood thick core board dates back to the 1990s , when China did not have plywood, or China just tried to produce plywood. The imported Indonesian board on the market, some of which have thick core boards, and later some manufacturers in Guangdong. According to the local material advantages, the large stem eucalyptus tree produced in Guangxi, Guangdong, was used to make some solid wood thick core plates by rotating thick sandwich cores. However, due to the limited technical level at the time, the defective rate was high, and the quality was often not comparable to the traditional thin core. Board. So it has not been widely promoted.
With the gradual improvement of people's living standards, people's attention in home decoration has paid more and more attention to taste and quality. At the end of 2014 , the popularity of environmentally friendly short films under the "under the dome" has set off a whole society that pays attention to green environmental protection. wave. The industry also said that environmental protection and health are the most important criteria for consumers to choose home improvement products. China in January 1, 2015 implementation of the new environmental law. At this time, a number of household sheet companies, including King's plate, are committed to promoting the concept of green and environmentally friendly homes, in order to make the construction of environmentally friendly homes "real", so that the concept of green low-carbon is deeply rooted in the hearts of the people, making consumers more and more accepted. And recognize “green productsâ€. Combining with the current technical level, the company has jointly developed and developed the current “solid wood thick core boardâ€, a new environmentally friendly product, with the technicians of the machinery factory and the rotary cutting material factory. This is a milestone in the decoration materials industry and has opened up a high-end ecological board. future.
Solid wood thick core ecological board, currently has three layers of thick core and five layers of thick core two structures, three layers of thick core is more highly respected. Because it has less glue layer, fully dried core material, E0 glue, no whole core, no flatness, no deformation, environmental protection is better than E0 , more infinitely close to solid wood! It perfectly solves the problem that the ordinary multi-layer solid wood board is easy to open, stack core, core off, and formaldehyde exceeds the standard, especially the lateral slotting and easy splitting phenomenon is completely improved! At the same time, compared with the more used by the consumers, the Malacca and Chinese fir ecological boards: due to the large use of urethane glue in the slats of the blockboard, the formaldehyde emission is generally high, and the environmental protection is generally low, which is why most of the fine The reason why wood board tastes pungent. Some blockboards on the market are made by cutting corners. When the solid wood strips are spliced, there is a large gap. There are a lot of voids inside the board. If nails are punched in the gap, there is basically no nail holding force. The solid wood strip inside the blockboard is longitudinally spliced, so the vertical bending resistance is poor, and the long-term stress will cause obvious lateral deformation of the board. The solid wood strip inside the blockboard is different in material size, and the density is different. It is only subjected to simple drying treatment, which is easy to warp and deform ; the structure is distorted, deformed, affecting the appearance and use effect. The King KINGTIMBER solid wood core board perfectly solves all these problems.
The solid wood thick core ecological board integrates the advantages of multi-layer ecological board and joinery ecological board, and truly achieves low formaldehyde content and is easy to process. Whether it is horizontal vertical slotting and nail holding power is better than other products. Because this product is solid wood whole core board, the strength and toughness plasticity is higher; because the number of layers is small, not only the formaldehyde content is greatly reduced, but also the probability of opening the layer is reduced, and the lack of core and overlap are eliminated.
As a high-end eco-plate brand, the king of KINGTIMBER launched a three-layer solid wood thick core ecological board. The core material is imported from New Zealand logs and the whole core is cut. The adjacent layers are made of Guangxi large stem stalks arranged vertically in the fiber direction, which improves the wood in nature. Anisotropy defects formed under growth conditions improve dimensional stability. The multi-layer veneers are arranged in a crisscross pattern, and the dry-shrinkage expansion system is extremely small, which solves the strong defects of deformation and cracking of solid wood plates from the aspect of internal stress. Before the decorative layer, the double-layered veneer is added to enhance the flatness of the board. Therefore, the King KINGTIMBER solid wood thick core ecological board represents the direction of the high-end ecological board, and it also conforms to the better and higher-end concept of the king's plate, and respects life. Just start with the king plate.
Only with the gradual shortage of forestry resources, the three-layer solid wood thick core ecological board will not be fully popularized, and will only be more tight. Here, the King's Plate Group also appeals to everyone to choose the right plate, the solid wood is good, but if you can't make the best use of it, you can only increase waste and protect resources, everyone is responsible.
While paying attention to health and environmental protection, we should not forget the current market situation, low-price competition in the market, vicious circle, and a large number of “three no†enterprises in the plate industry. At present, many plate companies are still in the era of barbaric competition and small country. Coupled with the lack of industry standards and inadequate supervision, some enterprises will be able to mix their eyes, reduce environmental protection, reduce material grade, and produce low-quality and environmentally-friendly products for the immediate benefit. Damage to people's health, but also disrupt the normal order of the industry and disrupt the market. Therefore, consumers should keep their eyes open when choosing, not to save a little money, but to buy plates that are harmful to their families, and also to promote unscrupulous plate manufacturers, it is not worthwhile.
The King's Plate Group also reminded its peers that the sheet metal industry has begun to enter a period of rapid development. The development of sheet metal enterprises is inevitable. The amount of formaldehyde released in connection with the decoration has become an important indicator for people to measure the environmental protection of home. If the sheet metal enterprises can provide high-quality, environmentally-friendly and even higher-level sheet products, they will certainly win the favor of many consumers. It is just a price war. It is not only others who will hurt, but will eventually hurt themselves.
As the operating organization of the UK KINGTIMBER Group in China, Junwang Plate Group adheres to the better and higher-end product concept and follows the European standards in quality control. The Junshi Eco-board is also a model for children's room special boards and high-end residential villa boards. Prestige life, start from the king plate!
Why is Standing Desk becoming more and more popular? Sit stand desk is not only a desk. Using sit and stand desk station interchange for office can make sense of life, reduce fat, enhance energy, reduce pain, improve work efficiency and improve team cooperation ability.
1.5-2.5mm thick cold rolled steel plate with high mechanical strength, smooth surface and uniform thickness,Double motor balanced drive, lifting the whole table without shaking. The rising and falling sound is less than 45 dB, which is lower than that of keyboard typing.
The color of ergonomic standing desk frame: black, white, gray, and can be customized; it can be matched with different color panels, reflecting the modern design of the product.
Sit Stand Desk,Sit And Stand Desk,Electric Sit Stand Desk,Stand Up Sit Down Desk,Best Sit Stand Desk
Suzhou Uplift Intelligent Technology Co., Ltd , https://www.uplifting-desk.com